Our range of TRACKMASTER™ devices that fit your budget and most importantly satisfies
the purpose with which it has been designed with you in mind.
Small & Smart
Firmware
- Ignition detection
- Geo-fence
- Over speeding detection
- FOTA
- Green driving
- Fuel monitoring LLS
- Jamming detection
- Idling detection
- Crash detection
- Trip detection
- Towing detection
- Integrated scenarios
- Offline tracking
- Voice call (via Bluetooth)
Hardware
- Internal GNSS antenna
- DIN – digital input – 1
- AIN – analog input – 1
- Battery –170mAhLiion37V
- Micro SD (Up to 32GB)
- 1x SIM Card
- USB 2.0 Interface
- DOUT – 1
- Overvoltage protection
- Internal GSM antenna
- 128MB internal flash memory
Accessories
- Immobilizer
- Alarm Button
Glossary
- GNSS (Global Navigation Satellite System) It is a satellite system that is used to pinpoint the geographic location of a user’s receiver anywhere in the world. E.g. GPS, GLONASS, Galileo, Compass (MEO).
- GSM ( GLOBAL SYSTEM MOBILE) GSM stands for Global System for Mobile Communication and it functions within the device to receive data such as the MTN SIM card.
- GEO-FENCE Geofencing feature lets a user create a virtual zone (Geo Zone) on a map and get an alert when a selected object leaves or enters that zone.
- OVERSPEEDING This is when the vehicle speed exceeds parameter value. The scenario is activated until current speed decreases below parameter value and this gives you an alert when such Incident happens through SMS.
- JAMMING DETECTION This is a solution that provides jamming immune tracking for fleets to help combat vehicle hijacking.
- TOWING DETECTION Towing detection feature helps to alert the driver about car towing. It generates reports when the car is being towed away.
- GREEN DRIVING Helps to prevent and inspect driver about harsh driving. Eco-driving scenario continuously monitors accelerating, braking, and cornering forces depending on a build in accelerometer or Green driving depending on GPS.
- IDLING DETECTION Informs you if your vehicle is stationary but the engine is on for a selected period of time to help you to save fuel.
- FOTA This is when configuration or update is done over-the-air.
- CRASH DETECTION If Crash detection is enabled, it monitors acceleration on each axis, which helps to detect an accident
New Generation
Firmware
- Ignition detection
- Geo-fence
- Over speeding detection
- FOTA
- Green driving
- Overspeeding Detection
- Crash Detection
- Jamming detection
- Trip detection
- Integrated scenarios
- Offline tracking
- GNSS Fuel Counter
Hardware
- Internal GNSS antenna
- 1-wire-1
- Battery– 170mAhLi ion
- 1x SIM Card
- USB 2.0 Interface
- Overvoltage protection
- Internal GSM antenna
- 128MB internal flash memory
Accessories
- Immobilizer
- I-Button / I-Reader
- ALL-CAN (Advance Fuel Monitoring)
- LV-CAN (Simple fuel monitoring)
Glossary
- GNSS (Global Navigation Satellite System) is a satellite system that is used to pinpoint the geographic location of a user’s receiver anywhere in the world. Eg GPS, GLONASS, Galileo, Compass (MEO).
- GSM ( GLOBAL SYSTEM MOBILE) GSM stands for Global System for Mobile Communication and it functions within the device to receive data such as the MTN sim card.
- GEO-FENCE Geofencing feature lets a user create a virtual zone (Geo Zone) on a map and get an alert when a selected object leaves or enters that zone.
- OVERSPEEDING This is when the vehicle speed exceeds parameter value. The scenario is activated until current speed decreases below parameter value and this gives you an alert when such Incident happens through SMS or EMAIL.
- JAMMING DETECTION This is a solution that provides jamming immune tracking for fleets to help combat vehicle hijacking.
- TOWING DETECTION Towing detection feature helps to alert the driver about car towing. It generates reports when the car is being towed or raised.
- GREEN DRIVING Helps to prevent and inspect driver about harsh driving. Eco-driving scenario continuously monitors accelerating, braking and cornering forces depending on a build in accelerometer or Green driving depending on GPS.
Waterproof
Firmware
- Ignition detection
- Geo-fence
- Over speeding detection
- Unplug Detection
- FID 1-Wire
- Eco driving
- Jamming detection
- GNSS Fuel Counter
- Crash Detection
- Trip detection
- Integrated scenarios
- Offline tracking
Hardware
- Internal GNSS antenna
- Internal GSM antenna
- 1-wire-1
- Battery-1800mAh Li-poly 3,7V
- 128MB internal flash memory
- 1x SIM Card
- USB 2.0 Interface
- Outdoor casing
Accessories
- Immobilizer
- I-Button / I-Reader
Glossary
- GNSS (Global Navigation Satellite System) is a satellite system that is used to pinpoint the geographic location of a user’s receiver anywhere in the world. Eg GPS, GLONASS, Galileo, Compass (MEO).
- GSM ( GLOBAL SYSTEM MOBILE) GSM stands for Global System for Mobile Communication and it functions within the device to receive data such as the MTN sim card.
- GEO FENCE Geofencing feature lets a user create a virtual zone (Geo Zone) on a map and get an alert when a selected object leaves or enters that zone.
- OVERSPEEDING This is when the vehicle speed exceeds parameter value. The scenario is activated until current speed decreases below parameter value and this gives you an alert when such Incident happens through SMS or EMAIL.
- JAMMING DETECTION This is a solution that provides jamming immune tracking for fleets to help combat vehicle hijacking.
- TOWING DETECTION Towing detection feature helps to alert the driver about car towing. It generates an event when a car is being towed or raised.
- GREEN DRIVING Helps to prevent and inspect driver about harsh driving. Eco-driving scenario continuously monitors accelerating, braking and cornering forces depending on a build in accelerometer or Green driving depending on GPS.
OPTIONAL ACCESSORIES
IButton
IBUTTON IS A SOLUTION FOR FLEET MANAGEMENT TRACKER IN FOLLOWING CASES:
- Driver authorization – gives the ability to use a vehicle only for specific iButton owners and identify which driver is on the road.
- Immobilizer – without iButton authorization you cannot run engine starter and use the vehicle.
- AutoGeofencing – gives the ability to know when the car leaves customized areas without iButton authorization.
NOTE: This device only works with the New generation and Waterproof.
LVCAN 200 – Light vehicle CAN adapter
LV-CAN200 is designed to acquire data from light vehicles, trucks and buses. Easily get basic parameters such as mileage, fuel level, etc.
BENEFITS OF LVCAN200
Access to CAN Bus data enables fleet operators to report on a wide range of information. You can effectively identify areas of improvement within their vehicle operation to drive down overheads and minimize environmental impact.
NOTE: This device is compatible with New Generation device only.
ALL-CAN300
This device helps Capture CAN data from any kind of transport!
- CAN data reading from trucks
- CAN data reading from light vehicles
- CAN data reading from agriculture transport
- CAN data reading from buses and coaches
- CAN data reading from special transport
- An advanced solution which reads more than 100 parameters
BENEFITS OF ALL-CAN300
The communication network can provide a wide range of data that can be used to reduce running costs, improve driver safety, streamline maintenance processes and support environmental responsibility.
NOTE: This device is compatible to only New Generation Tracking device.